黄南2025摩托车英语科目一考试题

1. When driving on a road covered with ice and snow, the motor vehicle may spin or slide when increasing the speed urgently, due to the loss of vehicle stability.

A. Right

B. Wrong

Answer: A

2. What should be checked before driving?

A. No parts need to be checked

B. Whether the tires have been cleaned

C. Where the spare tire is placed

D. The fastening and air pressure of tires

Answer: D

3. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

4. When overtaking on a rainy day, drivers should turn on headlamps and sound a long horn.

A. Right

B. Wrong

Answer: B

5. What is the meaning of this sign?

A. No passing

B. Driving at reduced speed

C. Time limit for entering

D. No entering

Answer: A

6. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

7. For a temporary stop on a foggy day, the driver should only turn on the fog lamp and the low-beam

A. Right

B. Wrong

Answer: B

8. Which of the following method is correct to rescue an unconscious person?

A. Apply cardio-pulmonaryresuscitation immediately

B. Press the philtrum of the wounded person with force

C. Continuously slap the face of the wounded person

D. Check the breath of the wounded person before other emergency treatments

Answer: D

9. What is the meaning of this sign?

A. No right turn

B. No U turn

C. No going straight

D. No left turn

Answer: C

10. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D