驻马店摩托车英语科目一教材

1. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: C

2. What is the meaning of this sign?

A. Muddy road

B. Low-lying road

C. Overflowing road

D. Ferry

Answer: C

3. Which of the following method is correct to rescue an unconscious person?

A. Apply cardio-pulmonaryresuscitation immediately

B. Press the philtrum of the wounded person with force

C. Continuously slap the face of the wounded person

D. Check the breath of the wounded person before other emergency treatments

Answer: D

4. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

5. When using splints, sticks or tree branches to keep the unexposed bones in position, it is necessary that these things should exceed the upper and lower joints of the wound.

A. Right

B. Wrong

Answer: A

6. When rescuing a wounded person in coma, it is necessary to take warm-keeping measures to prevent heat loss.

A. Right

B. Wrong

Answer: A

7. When an erosive material catches fire, it should not be put out with water cannon.

A. Right

B. Wrong

Answer: A

8. What should be done by the driver who intends to overtake but the motor vehicle in front neither reduces its speed nor allows the right of way?

A. Continuously sounding the horn and accelerating to overtake

B. Accelerating and continuing to overtake

C. Refraining from overtaking

D. Following the vehicle in front closely and finding a chance to overtake

Answer: C

9. When driving on a long downhill road, which is the best way to control driving speed?

A. Coast in neutral gear

B. Depress the clutch and coast

C. Use the engine to brake

D. Depress the brake pedal continuously

Answer: C

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D